Conveyor use process conveyor belt deviation how to do

The use of conveyors to transport materials is quick and easy to save time and labor. Even if problems arise, maintenance is very convenient. It is something we all know. Today we look at how to adjust if the Conveyor Belt runs in the process of use.
1 In the head conveyor belt deviation, adjust the head drive roller, after the adjustment is completed, the positioning block at the bearing seat is welded and the drive device can not follow the movement.
2 In the tail belt deviation, adjust the tail change roller or screw tension device, when adjusting a group of rollers is not enough to correct,
Several groups can be adjusted continuously, but the skew angle of each group should not be too large.
3 In the partial area, deviations can be adjusted automatically by adjusting the heart.
4 If the above method still can not eliminate the deviation, you should check whether the conveyor belt joint is straight, and if necessary, should be reconnected; whether the rack is tilted, whether the feeding direction is appropriate; whether the rubber pressure on both sides of the material guiding groove is even.
5 The above adjustment should be repeated when the conveyor is unloaded or full load. After the conveyor belt has a margin of 0.05B (B is the bandwidth) around the conveyor roll, we will introduce it one after another. You must remember to pay attention.