Telescopic belt machine adds a telescopic mechanism to the ordinary ribbon conveyor. So the conveyor can flex on the length direction freely to achieve the effect of controlling conveyor length at any time.
Users can adjust the button to control the length of conveyor according to his own requirements. If add a lifting device at the bottom of the machine, users can also control the end height of the conveyor at any time.
The Telescopic Belt Conveyor can be used separately to finish loading and unloading goods in both forward and reverse directions.
It can also constitute a complete and automatic transportation system together with our lifting elevator, roller conveyor, fixed Belt Conveyor and production line to finish a set of flow from the raw material enter into company, assemble, finished products to delivery.
| Explanation about the telescopic conveyor |
| Part A | Part B | Part H | Part H2 |
| Fixed length | Extended length | loading plat height | Height between the earth and plat of the truck |
| Specfication | Section | Part A (length M) | Part B (length M) | Weight (Estimated) | Min height (conveyor) |
| SQ-G-A-3-5/7 | 3 | 5 | 7 | 1.8t | 650mm |
| Belt Width(mm) | Voltage | Belt | Motor | Electrical element | Package |
| 600/800/1000 | 220/380V 3-phase | Ammerral PVK | SEW/NORD | Shneider | Wooden case |
| SQ-G-A-3- 5/7 "SQ" means shuangqi our company's name, "G" means this is fixed style, the equipment should be fixed on the ground. "A" nonsonse, "3" means this is a three section conveyor, "5" means the fixed part(Part A) is 5 meters long. "7" means the extended part(Part B) is 7 meters long. |
The following pictures are just for showing the stretching and retraction status of the Telescopic Conveyor.
All the other specifications
Contact Now
